Antminer S19 S19jpro S19pro immersion oil cooling kit

Product Description

ASIC immersion cooling box oil-cooled box for Bitmain Antminer S19, S19pro,S19jpro, etc,Oil immersion oil kit Home and small mining farm use than can overlocking hashrate and reduce the noise

A single ASIC miner immersion oil-cooled chassis can accommodate 1 set ,3sets,6sets of Antminer S19, or 6 sets of Antminer S19 and other models, It is a liquid cooling cabinet for both ASIC Miner

Immersion cooling case work with the ASIC miner using a circulating pump and special liquid instead of air to manage the heating and cooling of the mining rig. The cooling liquid flows over the heat sinks on the chip, transferring large amounts of thermal energy into the liquid to maintain the temperature required for the chip to function properly.

The temperature of 3000W mining equipment is controlled at about 50 degrees, which reduces the miner failure rate and prolongs the life of the miner rig. 0 noise, to achieve stable overclocking of the device.

Realization principle: The ASIC miner is fully immersed in the transformer oil, and the flowing water and oil take away the heat on the cooling device. The temperature sensor monitors the oil temperature in real time, and the ultra-high power failure protection equipment. The equipment has reduced radiation to the human body, stable temperature control, extended life, reduced failure rate, and can be overclocked.

Single cabinet size: 90*73.5*55cm

Chassis size: 60*60*33cm

Notice: this product is a cabinet, in addition to the hardware that comes with it, customers need to purchase it by themselves:

1. Water tower or Water cooling radiator or dry cooler

2. Filter water valve

3. Water pump (20 liters per minute)

4. Fan speed simulator 

Specification

Features:

1.Low noise less than 50dBA

 2.more suitable for home mining

3.Overclocking benefits and energy saving

Mainstream miners can be overclocked by 20-50%

 Better power effciency compared to air cooling

. loT sensors and smart monitoring

 loT sensors help to monitor the running status.

  Compatible with most ASIC miner models

 Including BTC, ETH, LTC, KDA, CKB, HNS miners and more.

 Advanced fluid flow design to achieve precise control of heat

Low damage rate due to precise temperature control.

 Stable running with little maintenance.

 No static.dust. short circuit. oxidation, or fan vibration

 Related Products:

Antminer S19 water cooling plate

Antminer S19 water cooling plate

Antminer S19 water cooling plate

Antminer S19j water cooling plate

Antminer S19jpro water cooling plate

Antminer S19pro water cooling plate

Whatsminr M30S water cooling plate